安科瑞智能照明系统在马来西亚国家石油公司项目的应用

发布时间：2022-12-02

浏览量：491

摘要：随着社会经济的发展及网络技术、通信技术的提高，人们对照明设计提出了新的要求，它不仅要控制照明光源的发光时间、亮度，而且与其它系统来配合不同的应用场合做出相应的灯光场景。本文介绍了马亚西亚石油公司智能照明项目的应用。

Abstract: With the development of economy and the improvement of network and communication technology, we propose new requirements for lighting design. It not only need to control the luminous time and lighting brightness , but also makes lighting scene with other systems in different applications. This article introduces the application of smart lighting control system of Malaysia Petroliam Nasional Bhd project.

关键字：智能照明系统；节能减排；照明控制;

Keywords: smart lighting system, energy saving, lighting control

0.项目概述

Project overview

马亚西亚国家石油公司位于首都吉隆坡，本次项目主要做该公司新建办公室智能照明控制，并用后来软件实现集中控制。

Malaysia Petroliam Nasional Bhd is located in the capital Kuala Lumpur. This project mainly deals with the smart lighting control of the office building, and realizes central control by a background system.

1.系统介绍

System introduction

Based on KNX bus technology, Acrel-BUS smart lighting control system originates from Europe and develops from the three bus control technologies for residences and buildings including EIB, Batibus and EHS, of which EIB (European Installation Bus) is the agent technology. It uses the dual-core shielded twisted pair as the bus cable to connect all control modules for system control.

The system can integrate various independent control functions and combine many advantages including comfort, flexibility, safety, energy conservation, economy, easy maintenance into one system. It is mainly used for the control areas of large pubic construction projects including residences and buildings.

2.国家石油公司照明系统图

Lighting system diagram of Petroliam Nasional Bhd office building

3.系统功能

System function

Manual control: smart panels and touchscreens installed in all areas can realize real time control of light on/off and brightness according to actual needs.

Auto control: sensors of different functions (e.g. illuminance transducers and human motion sensors) can realize automatic control of light based on external environment.

Scenario control: different scenarios can be preset for switching between them.

Time control: the system will automatically complete the light control according to the preset operation time to ensure minimum energy consumption in idle period.

Central control: for all controls, real time monitoring and effective control of the entire lighting area can be realized. It facilitates the control modes and saves labor and power.

Status feedback: the system can give feedback on the on/off function of lighting fixtures on the site.

System linkage: the lighting system can form system linkage with the property management system, the building automation system and the security &fire system.

4.系统界面

System screen

安科瑞智能照明监控系统针对国家石油公司公共照明区域进行智能控制。

智能照明公共照明控制界面见下图，主要实现公共照明控制，可统一控制，也可单独控制，控制状态可在界面上直接显示出来，同时可以设置各照明回路自动亮灭时间。

Acrel smart lighting system controls the public lighting area of Petroliam Nasional Bhd.

The lighting control system is shown in the figure below, mainly realizes public lighting control, which can be controlled centralize or independently. The control status can be directly displayed on the touch screen, and the automatically set the lighting circuits on-off time.

Smart lighting interface 1

Smart lighting interface 2

定时智能照明控制主界面见下图，特定区域根据时间段控制来自动控制公共区域的照明的通断。

The main interface of smart lighting control system is shown in the figure below. Special areas can automatically control the lighting on and off of public areas according to time period control.

定时控制界面示意图一

Timely control screen one